75,200.00 €
gross price
Buy now Contact us

15.86 m

227 kg

6.460 kg

Technical data:


– 15.86 m – Working height
– 7.52 m – Lateral reach
– 7.14 m – Ground clearance with horizontal side reach
– 227 kg – Platform capacity


– 1.52 m – Length of the JiB arm, vertical range of movement – ​​139° in the Z45/25J model
– 1.83 m wide steel platform with entrance on both sides and hinged gates
– Self-leveling platform
– Hydraulically rotated platform -90°/+90° in the Z45/25 model, and -80°/+80° in the Z45/25J model
– Hydraulic oil cooler
– Thumb direction button
– Protection against mistaken driving in the opposite direction
– The design of the arms allows you to maintain a distance from the wall while moving the platform vertically
– Proportional joystick control
– Dome rotation 355° – not continued
– Tilt level sensor with sound signal
– System protecting the operator against crushing
– No swerving from the rear of the vehicle
– Traction control system
– Two driving speeds
– Active oscillating axis
– 230V line connected to the platform (not secured)
– Horn
– Warning light
– Movement and driving alarm
– Hour counter
– Certified weighing system in the machine platform
– Connector for the Telematic system – preparation for work with a GPS module


– Emergency power supply – 12V DC
– Duetz Diesel engine – 35.8 kW (48 hp)
– Intake air heater
– The engine extends from the machine base on a rotating platform


– 4 x 4


– Off-road, filled with foam


– Swinging goal on a platform with a half-height net
– Additional barrier around the platform to prevent the employee’s hands from being crushed
– Protective structure for the operator
– Two-axis joystick control
– Pneumatic line connected to the platform
– Protection of the 230V line connected to the platform (plug, socket, residual current device, electrical measurements)
– Work lights – 2 on the platform, 2 on the platform
– Airplane Protection Package¹΄² (Foam guardrail + Crash bottom impact deactivation system (only available on JiB models)
– Package for work in difficult conditions with high dustiness:¹ accordion covers of cylinder piston rods, scraper brushes at the ends of arm segments and cover of the upper control panel
– Platform panel holders (only with foam-filled wheels and 3-entry platform)
– Biodegradable hydraulic oil
– Cutting off the machine’s operating functions when the permissible tilt of the machine is exceeded
– Exhaust system with catalytic converter¹
– Power cut-off module at too low temperature
– Preheating the engine before starting³
– Oil pressure and temperature indicator
– AC generator 230V/50Hz 3000W
– EX anti-explosion protection for work in gas or dust explosion hazard zones
– GPS module providing information about location and performed operations
– Top panel cover
– Non-marking, foam-filled wheels